Regular pool maintenance will be the key if you want a clean and well-maintained swimming pool. This maintenance stays successful when you create a strict swimming pool cleaning schedule and set a time to avail of timely pool service in Perth. This will appear complex in the beginning for new pool owners, but the fact is that it is the simplest and the most promising way to understand pool maintenance and the three Cs of pool maintenance.

WHAT ARE THE THREE Cs OF POOL CARE?

These three Cs of pool maintenance are considered the foundation of effective pool service Perth and a kind of foundation that an effective pool care schedule is built on. These three Cs stand for CIRCULATION, CLEANING and CHEMISTRY. Let us go through the details of pool maintenance and pool service in this article here, but let us first understand CIRCULATION.

ROLE OF CIRCULATION IN POOL MAINTENANCE

This might sound insignificant or new, but the proper pool maintenance schedule starts with CIRCULATION. This term, 'CIRCULATION', refers to your swimming pool's ability to move water from the pump towards the filtration system and back. Keeping a pool clean that fails to circulate water is very tough because standing water is a breeding ground for germs, bacteria, algae, and other water-borne organisms. This is the reason why the circulatory system is needed, and it is made up of four primary parts. 

  • THE WEIR
  • THE PUMP
  • THE FILTER
  • THE POOL JET

All these parts play a very important role in the overall circulation process or maintaining pool water quality. The proper functioning of all these four components is necessary to complete the circulation process. Otherwise, the water quality would be different and not sufficiently clean.

HOW DOES THE POOL CIRCULATORY SYSTEM WORK?

As mentioned above, four different parts get activated in the circulatory process, and the first role is of the pump that has to suck water from the pool and send it towards the weir where bigger debris such as leaves, twigs, etc. are captured and then the water is sent towards the filtration system. The role of the filtration system is to completely remove minor debris and impurities from the water. This filter is responsible for cleaning the water and removing microscopic dirt. In short, it has to remove every impurity out of the water before it is pumped back into the swimming pool with the help of pool jets.

RUN THE POOL PUMP AT LEAST 8 TO 10 HOURS PER DAY

According to experts of pool renovations in Perth, the longer water is pumped through the filter system, the cleaner it will be, but running the filtration system 24/7 is not practical. This is why experts of pool service in Perth recommend running the pool pump for at least eight hours every day during the summer season. The duration can be reduced to 6 hours in the winter months.

BACKWASHING AND CLEANING THE FILTER

Maintenance of the filter part is also necessary to keep it competent enough to perform adequate filtration. This backwashing or cleaning is recommended every 2 weeks or when the pressure gauge reads 10 PSI or above.

ANGLING THE JETS

This is another crucial step recommended by the experts of pool service in Perth and must be taken every 2 weeks. This is done to ensure that the pool jets are pointing away from the weir, as this will ensure that the water will cycle around the entire pool. As a result, it becomes easier for the weir to eliminate the debris in the swimming pool. Angling the jet downwards is also recommended, as the bottom of the pool gets sufficient circulation of water.

CLEANING THE SWIMMING POOL

This is an essential part of the overall pool service in Perth and has steps like scrubbing the pool surface, skimming the debris from the water and vacuuming the pool floor. There is an option of performing manual cleaning, and another option is using an automatic pool cleaner or robotic pool cleaner, as recommended by experts in pool renovations in Perth. This robotic pool cleaner makes the pool cleaning process much easier and less stressful than DIY cleaning. Let us go through some essential steps taken in swimming pool cleaning. 

THOROUGH SCRUBBING

Scrubbing the pool surface with a pool brush is recommended every two or three days to prevent algae growth and issues like staining and scaling. This scrubbing is recommended for areas around the steps, ladders and below the weir. Experts of pool renovations Perth recommend this step to be taken manually regardless of whether you have a robotic pool cleaner to clean your pool or not.

SKIMMING THE SWIMMING POOL

This should also be done in a frequency of three days and the process involves cleaning the surface of the water with the help of a net or leaf rake to remove large debris. If not removed on time, this debris can sink into the water to cause staining on the bottom of your swimming pool.

VACUUMING THE SWIMMING POOL

A pool vacuum is an essential part of pool service in Perth and can be done with the help of an automatic pool cleaner. Its role is to remove debris from the water that can reduce circulation and damage your pool. This task is easy with a pool vacuum that is often attached to the weir. However, if you have a robotic or automatic pool cleaner for pool cleaning, the frequency of vacuuming can be reduced to once every 7 days to remove the debris that the cleaner missed.

CREATING A POOL MAINTENANCE SCHEDULE

A swimming pool maintenance schedule created and followed strictly will help a lot in regularly maintaining your swimming pool. This way, your pool will be ready for summer without significant stress or hard work to prepare it as the season arrives. Here are the details of some common steps recommended by experts in pool service in Perth.

DAILY CLEANING:

  • Run your pool pump for 8-10 hours

BI-WEEKLY CLEANING:

  • Clean the weir basket
  • Scrub the surfaces of the pool
  • Skim the surface
  • Vacuum the pool floor or use an automatic pool cleaner
  • Test the pool chemical levels
  • Correct them where necessary

BI-MONTHLY POOL MAINTENANCE IN PERTH

  • Backwashing or cleaning the filter if the pressure is above 15 PSI.
  • Make sure that the jet is facing away from the weir.
  • Add a shock treatment to your pool, and based on the size, you will have to add at least two shock treatments.

WHAT IS SHOCK TREATMENT FOR POOL?

Experts in pool service in Perth recommend shocking the pool twice a month during summer. This process refers to adding large doses of chlorine to your swimming pool to free it from bacteria, contaminants and other organic matters.

  • It's a good idea to shock your pool:
  • After long periods of heavy use
  • After rainstorms
  • After a spill or contamination, such as a washout from the garden
  • After an algae breakout

Following these basic pool cleaning and maintenance steps will contribute enormously towards keeping your swimming pool completely hygienic and crystal clear. You will avoid problematic algae growth easily, and since you will be proactive towards your swimming pool, and every problem will be traced as soon as it emerges, and you will be able to take immediate action for its complete eradication.